Product Care

Removing water spots from stainless steel surfaces. Hard water can leave deposits on stainless steel, but fortunately these are not difficult to remove. If the stains are very hard, pour some vinegar over it and let it stand for some time. Other wise you can just wet a cloth or tissue with vinegar and wipe the stains away. Cleaning stainless steel. You can use dish washing soap or baking soda to clean stainless steel. Do not use steel wool since it can create scratches and also contaminate the surface causing it to rust. Cleaning Instructions for Dish drainer Use of baby oil After cleaning the drainboard with dish soap and wiping down, put a few drops of baby oil or mineral oil on the surface and spread it on the surface using a paper towel. This gives the surface a gleaming sheen and also helps resist formation of water spots. Use of Zud In rare cases, certain minerals in the water can cause the formation of brown spots on the surface. These are not rust spots, but deposits which can be easily removed if cleaned promptly. The cleaner 'Zud' is found to be effective in removing these brown spots. Dish washing Dish washers cannot harm the products since they are made of stainless steel. However, they may not be able to achieve spot free cleaning. Hence we do not recommend it for the dish rack and the drain board. We do recommend it for the cutlery holder. Stainless steel magic This product is found to be effective in removing water spots. Removing finger prints from napkin holder Carefully spray glass cleaner on the affected area and then wipe clean with cloth or paper towel. Cleaning cutlery holder We recommend using a bottle brush to clean the inside compartments of the cutlery holder. Alternatively you can also clean it by spraying with Lysol, letting it sit for 5 min and then rinsing clean.