Rohan Dish Rack Drainer

This product is radically different from others on the market and may not work in all situations. Please make sure you have enough space for this product before ordering. All measurements can be found under Dimensions at bottom of this page. Please also watch the Features video to understand how it works.

To visualize this product in your space, go to this page on your smart phone. Click on the Visualize button. A 3D model and a cube will appear. Point the camera where you would like to visualize the item and click on the cube. A 3D model of the product will appear in the scene you see on your screen. You may position the product in the scene by moving it with your fingertips. To end, click X on top right corner.

Please watch this video before you order: Rohan dish drainer: Features, use & care 

When placed with the long edge overhanging the sink, water from wet items drips on to the drainboard and flows directly into the sink.  The drain board does not hold water, instead it continuously and automatically channels water into the sink.  Since it does not store water like a tray,  the board stays dry and hygienic.  The drain board has 4 legs which raise it well above the counter to allow for cleaning underneath as well as to clear the edge of raised lip kitchen sinks.

The dish rack has an open area with slots for holding 13 dishes.  This area is also used for placing pots and pans and other large items which can be placed edgewise to save space.  The dish rack has a separate area for holding tumblers, cups, glasses and other small items.

The cutlery holder is fully enclosed on all sides and features a removable divider for easy cleaning.  When the divider is in place it creates 4 compartments and can hold a large number of cutlery pieces.  The cutlery holder can be hung either inside or outside the rack. The feet are provided with plastic covers to make them slip resistant and prevent marking the counter top.

The dish drainer can be placed on either side of the sink and the dish rack can be reversed to have the plate compartment near or away from user.

The drain board, dish rack and cutlery holder can be easily separated.

The 18 inch long side of the drain board lines up with the side of the sink. Due to the curvature of the board, water pours out only from the middle region and not the entire 18 inches.  Since the 18 inch side utilizes the full depth of the kitchen counter, this dish drainer only uses 13 inches of counter width. You cannot turn the dish drainer at right angle to drain from the short side.

An optional accessory sponge holder, Zojila Khiva sponge holder is available for this product.  This sponge holder, also fully stainless steel, hangs on the frame of the Rohan, overhanging the sink and draining into it.  It is very handy to keep your sponge or scrubber.

Normally, this dish drainer is kept next to the sink, overhanging its edge and draining directly and continuously and automatically into the sink. But it is also possible to keep it away from the sink and have it drain into a small tray. The Zojila Pantanal tray can be used for this purpose.

If you have small items to dry such as baby bottle parts, the Zojila Palena utensil tray  can be used as an accessory with the Rohan drying rack.

Please watch this video: Rohan dish drainer: Features, use & care 

This product has material content from China and partial labor content from USA.

US Patents D473,359 S: D467,399 S