This product is radically different from others on the market and is available in two versions. Please evaluate your space and determine whether you need the long side drainer or the short side drainer. All measurements can be found under Dimensions at bottom of this page. Please also watch the Features video to understand how it works.
To visualize this product in your space, go to this page on your smart phone. Click on the Visualize button. A 3D model and a cube will appear. Point the camera where you would like to visualize the item and click on the cube. A 3D model of the product will appear in the scene you see on your screen. You may position the product in the scene by moving it with your fingertips. To end, click X on top right corner.
Please watch this video before you order: Rohan dish drainer: Features, use & care
The Rohan dish drainer includes a drain board, dish rack and cutlery holder, all made of heavy duty stainless steel. It is the only 100% stainless steel dish drainer in the market. The only parts that are not stainless steel are the soft leg covers to protect the counter.
When placed with the draining edge overhanging the sink, water from wet items drips on to the drainboard and flows directly into the sink. The drain board does not hold water, instead it continuously and automatically channels water into the sink. Since it does not store water like a tray, the board stays dry and hygienic. The drain board has 4 legs which raise it well above the counter to allow for cleaning underneath as well as to clear the edge of raised lip kitchen sinks. The legs are provided with soft plastic covers to make them slip resistant and prevent marking the counter top.
The dish rack has an open area with slots for holding 13 dishes. This area is also used for placing pots and pans and other large items which can be placed edgewise to save space. The dish rack has a separate area for holding tumblers, cups, glasses and other small items.
The cutlery holder is fully enclosed on all sides and features a removable divider for easy cleaning. When the divider is in place it creates 4 compartments and can hold a large number of cutlery pieces. The cutlery holder can be hung either inside or outside the rack. The drain board, dish rack and cutlery holder can be easily separated.
The dish drainer can be placed on either side of the sink and the dish rack can be reversed to have the plate compartment near or away from user.
There are two versions of the dish drainer. The long side drainer drains water over the long edge and the short side drainer drains water over the short edge. You need to determine which one works best for you. The best way to do this is to cut a piece of cardboard to 18 inches by 13.5 inches and position it to see if the 18 inch side can overhang the edge of the sink by half an inch. If it can, then the long side drainer will work for you. If it cannot overhang due to obstructions, then check if the 13.5 inch side can overhang the sink by half an inch. If there is enough counter width available to accommodate this orientation, then choose short side drainer.
The long side drainer is more space efficient. The short side drainer costs $10 more and is meant for special cases where sink fittings such as water faucets obstruct placement.
In the long side drainer, the 18 inch side of the drain board overhangs the edge of the sink. Due to the curvature of the board, water pours out only from the middle 4 inch region and not the entire 18 inches. This version only takes up 13 inches of counter width. Choose this version if you have limited counter space and nothing obstructing the 18 inch edge from overhanging the sink.
In the short side drainer, the 13.5 inch side of the drain board overhangs the edge of the sink. In this version the dish drainer will take up 18 inches of your counter width, but there will be room both in front and back of the counter. If you have fittings like a water faucet on the sink, you may need to use this version. Contact us if you need the short side version since we only make it available on request.
Watch the video in the picture gallery to decide which version works best for you.
An optional accessory sponge holder, Zojila Khiva sponge holder is available for this product. This sponge holder, also fully stainless steel, hangs on the frame of the Rohan, overhanging the sink and draining into it. It is very handy to keep your sponge or scrubber.
Normally, this dish drainer is kept next to the sink, overhanging its edge and draining directly and continuously and automatically into the sink. But it is also possible to keep it away from the sink and have it drain into a small tray. The Zojila Pantanal tray can be used for this purpose.
If you have small items to dry such as baby bottle parts, the Zojila Palena utensil tray can be used as an accessory with the Rohan drying rack.
Please watch this video: Rohan dish drainer: Features, use & care
The word Rohan means 'the finest steel' in Zoroastrian
This product has material content from China and partial labor content from USA.
US Patents D473,359 S: D467,399 S
