Cabana In-cabinet Dish Drying and Storage Rack
Dimensions and Materials:
Bottom rack: 19.25 x 10.563 x 1.5 inches. The bottom rack has its own feet which is why it is 1.5 inches high and does not need pegs in the cabinet to support it. Material: 18-8 stainless; Finish: Glossy
Middle rack: 19.25 x 10.563 x 0.5 inches. The middle rack has to be supported on the pegs in the cabinet wall. Material: 18-8 stainless; Finish: Glossy
Top rack: 19.25 x 10.563 x 2 inches. The wine glass holder extends 1.5 inches below this rack. This rack also uses the cabinet pegs. Material: 18-8 stainless; Finish: Glossy
Drain tray: 17.5 x 10 x 1.125 inches; Material: Polypropylene; Color: Black
The inside dimensions of the cabinet should not be smaller than the dimensions of the racks but can be bigger by up to 0.25 inches. The racks can sit on the pegs or dowels of the cabinet.
The inside height of the cabinet should ideally be not less than 27 inches. In order to take the drain tray out, there should be a clear width of at least 17.75 inches with the door open. The door hinges may
protrude into this 17.75 inch opening as long as they are at least 1.5 inches above the floor of the cabinet.
If you have a cabinet that is much wider, say at least 24 inches, you can put the Patagonia dish drainer inside it. The Patagonia uses the same racks as the Cabana, but has its own side frames to support the racks.
The extra width of a 24 inch cabinet can be used for storing cutting boards vertically.
This product has material content sourced from China and some labor content from USA.